At some point, you’ve probably come across a cat
statue with one of its paws raised and swaying back and forth. This is
Maneki-neko or the Beckoning Cat, a common Japanese figurine, which is often
believed to bring luck to its owner.
Such talismans usually come in different
color variations and have different meanings, depending on which paw is raised
and what the cat holds in its other paw. For example, there is a belief that a
raised left paw attracts money, while a raised right paw protects it. However,
there are a lot of other versions and meanings, so be sure to check this article about Maneki-neko if you’re
interested in its origin and significance.
It might be hard to imagine all the minor
details of the figurine if you haven’t seen Maneki-neko before, so I highly
recommend that you head to Envato Market and look through these photo references on PhotoDune,
which will help you to see it from different angles and in different colors.
And now that we’re ready, let’s start making
our lucky charm!
1. How to Create a Cat’s Head
First of all, take the Rectangle Tool (M) and create an 800 x 600 px rectangle for the background to
make all the white details visible on the canvas. Apply a vivid purple radial gradient and use the Gradient Tool (G) to edit the position of the fill.
Let’s take the Ellipse Tool (L) and form the head from a 195 x 195 px circle. Apply a radial gradient from white in the center
to light beige at the edges. Use the Gradient
Tool (G) to position the gradient as shown in the image below, creating a
subtle shadow at the bottom of the head, thus making it spherical. We’ll be using a
lot of linear and radial gradients throughout this tutorial, applying them to
every single object that we create.
Now take the Direct Selection Tool (A) and select both side anchor points of the
shape. Move them down and to the sides a bit, making the bottom of the shape
flatter and wider.
Copy the head and Paste in Front twice
(Control-C > Control-F > Control-F). Move the top copy up a bit.
Select the two copies and use the Minus Front function of Pathfinder to cut the objects, leaving
a narrow crescent shape at the bottom of the head.
Fill the new shape with linear gradient from white to blue and switch it to Multiply Mode in the Transparency panel, making the shape
semi-transparent. This way we’ve added a gentle bluish overtone.
Let’s add a bright spot on top of the head.
Make a 120 x 120 px circle and fill it
with bright-orange linear gradient. Select both the head and the orange circle
and take the Shape Builder Tool
(Shift-M). Hold down Alt and
click the upper part of the orange circle that we want to delete. There we have
Now let’s draw the facial details. Use the Ellipse Tool (L) again to make a 50 x 50 px circle. Set its Fill color to none and its Stroke color
to a linear gradient of brown tints.
Head to the Stroke panel, set the Width
to 6 pt, and switch Cap to the middle
Take the Scissors Tool (S) and click the left and right anchor points of the shape to
split the circle into two halves. Delete the lower half. Rotate the shape a
bit, depicting a closed eyelid.
Keeping the shape selected, double-click the Reflect Tool (O) and flip the shape
over the Vertical Axis. Click Copy to make a reflected second eye.
Use the same half-circle shapes to create a mouth.
Copy the head shape and Paste in
Front (Control-C > Control-F). Bring
the copy to Front (Shift-Control-])
and make it much smaller.
Fill the copy with linear gradient from
orange to black and switch its Blending
Mode to Screen, thus making a
bright highlight on the forehead.
Now let’s form the ears. Use the Polygon Tool to make a 120 x 100 px triangle (you can change its size either in the control panel on top or in the Transform panel (Window > Transform)).
Fill the triangle with a gentle linear gradient
of the same white-beige colors as the head.
Select the top anchor point with the Direct Selection Tool (A) and pull down
the circle marker of the Live Corner
to make the top of the ear rounded.
Make a smaller rounded triangle inside the
ear. Fill it with bright-orange linear gradient, picking it from the top of the head with the help of the Eyedropper Tool
Rotate the ear and attach it to the head. Move the ear to Back (Shift-Control-[). Use the Curvature Tool (Shift-‘) to make the edges of the ear slightly
Use the Reflect Tool (O) to attach a mirrored copy to the other side of the
2. How to Make the Body of Maneki Neko
Take the Rounded Rectangle Tool and let’s form the body from a 195 x 190 px shape with smooth corners.
Fill it with radial gradient, creating a subtle shadow at the edges.
Use the Direct Selection Tool (A) to select the anchor points of the top
corners and move them closer to each other with the arrow keys, while holding Shift to make the shape narrower at the
to Back (Shift-Control-[), placing the body beneath
Add a light-blue reflection at the bottom of
the body, using the same technique as for the head.
Let’s make a paw from a 70 x 45 px ellipse, filled with linear
gradient from white to light beige. Select both side anchor points and move
them down, making the bottom of the shape flat.
Use the Line Segment Tool () while holding Shift to make three short vertical lines for the claws. Apply the
same brown linear gradient for the Stroke as we did for the eyes. Set the Weight
to 4 pt in the Stroke panel and make the tips of the lines rounded.
Now let’s create a little bell to decorate
our figurine. Make a 72 x 72 px circle
and fill it with radial gradient from yellow in the center to orange at the
edges, making it spherical and three-dimensional.
Copy the circle and Paste in
Front twice (Control-C > Control-F
> Control-F). Move the top copy down a bit and fill it with linear
gradient from yellow to black.
Select the two copies and apply Intersect to cut the top copy. Switch
the Blending Mode to Screen, making a bright highlight.
Create a small circle and a small narrow
rectangle and fill them with bright red linear gradient. Combine the two
objects, using the Unite
function of the Pathfinder.
Make the shapes fit the circle by deleting
its bottom part, either by applying the Intersect
function of the Pathfinder, as we
did in the previous step, or using the Shape
Builder Tool (Shift-M) as we did earlier (Part 1, Step 3).
Attach the bell to the cat’s neck
and place a bright yellowish-green ellipse beneath it.
As for the collar, let’s create a
bright-red ellipse above the top part of the body. Select both the body and the
ellipse and use the Shape Builder Tool
(Shift-M) while holding Alt to click
and delete the unneeded piece. Send
the collar Backward (Control-[) a
few times, placing it beneath the head and the bell.
Don’t forget to add the paws to the bottom
of the body.
In order to make the figurine more
realistic, we need to add some gentle shadows to it. Let’s see how we can make
a shadow from the bell.
Copy the bell circle and Paste in Back (Control-C > Control-B). Move the copy down a bit and
fill it with a vertical linear gradient from beige on top to white at the
Switch the Blending Mode to Multiply,
creating a subtle semi-transparent shadow.
Use the same method to add the shadows from
the head and paws. Remember to cut off and delete the unneeded pieces using the
Shape Builder Tool (Shift-M).
Let’s add the arms and front paws to our
Maneki Neko. Place a paw on the left (or right) side of the face, to your liking.
Use the Rounded Rectangle Tool to
make a 50 x 90 px shape with 20 px Corner Radius for the arm and
fill it with the same vertical linear gradient, from light beige to white, as we
have for the other body parts.
Add a light-blue overtone in the bottom
part of the arm, and don’t forget to create a gentle shadow from the paw,
placing it over the face.
Now let’s draw a fish that we’re going to
place in the second paw of our cat. Use the Ellipse Tool (L) to make an 115 x 55
px ellipse for the body and fill it with vivid linear gradient from lighter
pink on top to darker pink at the bottom.
Make another ellipse, fill it with light-pink
color, and place it over the body, covering its right part. Select both shapes
and use the Shape Builder Tool (Shift-M)
while holding Alt to delete the
pieces of the shape around the body.
Now we’ve formed the head of our fish.
Let’s add more details!
Make a smaller oval of 40 x 20 px size and fill it with a horizontal linear gradient of
darker pink shades.
Use the Direct Selection Tool (A) to select both side anchor points and Convert selected anchor points to corner
from the control panel on top, making the shape pointed.
Make a copy of the created object and
create a fishtail by combining the two indicated shapes.
Finish up the fish by adding a
half-circle for the eye.
Put the fish into the cat’s paw and
attach it to the body. Make a shadow from the paw as well as from the fish,
creating semi-transparent shapes in Multiply
Finally, let’s add a curved smooth tail to
our cat. Use the Arc Tool to attach
a nice arched shape to the left side of the cat’s body and apply a 30 pt Stroke with round caps.
> Expand the tail to turn it into an editable shape. Now we can apply a
linear gradient and add minor details.
Place a bright yellowish-orange ellipse on
top of the tail and use the Shape
Builder Tool (Shift-M) while holding Alt
to delete the unneeded piece around the tail.
Copy the orange piece and Paste
in Front (Control-C > Control-F). Make the copy smaller and turn it into
a bright-yellow highlight by picking the appearance from the forehead highlight with the Eyedropper Tool (I).
3. How to Create a Background in Oriental
Let’s create some elements for a simple Asian
background in order to make our image look balanced and complete.
Use the Ellipse Tool (L) to create a set of overlapping circles. Switch to the Rectangle Tool (M) and place a narrow
stripe in the bottom of the cloud to make its lower part flat.
Unite all the shapes in the Pathfinder
to make a single object.
Place the cloud beneath the cat and add a
darker blue overtone in the bottom of the shape, making it more three-dimensional.
Use the Ellipse Tool (L) to add two small circles on both sides of the
cloud and create a large red circle beneath all the objects, depicting a rising
Add a shadow from the cloud, placing it
above the sun shape.
Make a few more copies of the fish and
recolor them, making our composition more detailed and colorful.
Let’s create another cloud of a slightly
different shape. Use the Rectangle Tool
(M) to make a 200 x 25 px
light-yellow stripe. Add two more stripes above, varying their width.
Unite all three shapes in the Pathfinder
and select the entire shape with the Direct
Selection Tool (A). Pull the circle marker of the Live Corners to make all the corners equally rounded and smooth.
Add minor details to the cloud and place it
on top of the sun. Create a reflected copy using the Reflect Tool (O) and Send to
Back (Shift-Control-[), placing it beneath the sun.
Now let’s apply a pattern to our dark-purple
background. Create a rectangle of the same size as the background (800 x 600 px). Head to the Swatches panel (Window > Swatches), open the Swatch Libraries Menu, and find Patterns
> Decorative > Decorative Legacy.
Find the Waves Color pattern and apply it to the rectangle. You can change
the Fill and Stroke colors of the pattern by clicking the Edit Pattern button in the Swatches
If you want to make the scale of the
pattern larger or smaller, use the Scale
Tool (S). Double-click it and
set the desired value in the Uniform
field, but don’t forget to uncheck the Transform
Object box in order to Transform
Place the pattern over the background and
lower its Opacity to 10%, switching the Blending Mode to Screen
to make the pattern barely visible.
Subarashii! Our Maneki Neko Is Finished!
Great job! I hope you’ve
enjoyed following this tutorial and learned some new techniques while working
with basic shapes, gradients, and various functions of Adobe Illustrator. Go
ahead and create another lucky charm that will not only bring you fortune, but
will also bring your skill and creativity to a new level.